SYSTEM K 3025 SB

Raised floor comprising height-adjustable tubular steel pedestals, floor panels and surface coatings.
The raised floor system can be supplied with or without stringers.

1	Multi-layered, high-density chipboard or mineral fibre panels
2	Plastic edge trim, 0.6 mm thick, conductive/insulating
3	Thin sheet aluminium or steel, mineral fibre panels, also available without underside coating
4	Noise insulating layer, conductive
5	Head plate or gasket, diameter 90 mm
6	Column, diameter 24 mm x 2 mm
7	Flat nut to lock the desired height
8	Threaded bolts
9	Steel pedestal base, diameter 100 mm
10	Stringers for higher load-bearing capacities
11	Your choice of floor covering: e.g. PVC, linoleum, rubber, textile.

APPLICATION

To create cavities for installation and communication cables and climate regulation systems in offices, data centres and server rooms.

FLOOR PANELS

The multi-layered, high-density chipboard or mineral fibre floor panels are stencil milled in our factory to fit seamlessly together. The floor panels’ cut edges are protected with plastic edge trims (except for panels cut on site). The floor panels are manufactured to satisfy individual load-bearing requirements. Depending on the area of application, the undersides of the floor panels are lined with aluminium sheet or galvanised sheet steel. Any commercially available PVC, linoleum, rubber or textile floor covering that is suitable for raised floors can be used to cover the floor panels. A wide range of colours and patterns is available.

SUBSTRUCTURE

The floor panels are installed on a substructure of hot-dip galvanised, tubular steel pedestals which are anchored or glued to the subfloor. The pedestals are infinitely height-adjusted thanks to their adjustable threads. The floor panels are installed so that their corners rest on the gaskets. For higher load-bearing requirements, the pedestals can be mounted on stringers. For inspection or retrofitting, the floor panels and the stringers can be removed. The pedestals are equipped with a conductive sound insulation layer to dissipate electrostatic charges.

TECHNICAL DATA

Substructure grid	600 x 600 mm
Floor panel grid	Custom specifications upon request
Floor panel thickness	approx. 40 mm
Distributed load-bearing capacity	10 – 30 kN/m²
Point load	3 – 5 kN
Height	80 – 1.000 mm
Supporting structure	Height-adjustable steel construction from ±10 mm to ±30 mm
Weight	Depending on the selected substructure and floor panels, approx. 35 – 70 kg /m²
Fire protection specifications	F30, B2, B1, A2